Seahorse 3 Bean Sinker Mould
This sinker mould is proudly Australian made and will save you a fortune!
- Makes 5 sinkers at a time -
- 5 x 3 Bean Sinkers
- Makes sinkers that measure 25mm x 15mm (approx)
- Great value - Make your own sinkers and save a fortune!
- Easy to use with instructions
- Cheap, quick, easy and convenient
- Made In Australia
Please Note: Metal Rods Not Included
| SKU | SMBN3 |
| Barcode # | 9314048106107 |
| Brand | Seahorse |
| Shipping Weight | 0.3140kg |
| Shipping Width | 0.060m |
| Shipping Height | 0.034m |
| Shipping Length | 0.235m |
3
From 3 ReviewBy: Doug Stewart onHi fellas I found the sinker mould great . Just heat the mould really hot spray inside the mould with WD 40 heat the lead really hot put wire in the middle of mould gently clamp mould and poor lead slowly and all finished Great Thank you Doug
By: Doug Stewart onHi fellas I found it great ,use a bit of wire in the middle heat the lead very hot ,and really heat the mould spray inside the mould with WD40 and alls good Thank you Doug
By: Paul onMoney saver in the long run. Fun little project when you have spare time. Perfect all the time every time.
Seahorse 3 Bean Sinker Mould
This sinker mould is proudly Australian made and will save you a fortune!
- Makes 5 sinkers at a time -
- 5 x 3 Bean Sinkers
- Makes sinkers that measure 25mm x 15mm (approx)
- Great value - Make your own sinkers and save a fortune!
- Easy to use with instructions
- Cheap, quick, easy and convenient
- Made In Australia
Please Note: Metal Rods Not Included
| SKU | SMBN3 |
| Barcode # | 9314048106107 |
| Brand | Seahorse |
| Shipping Weight | 0.3140kg |
| Shipping Width | 0.060m |
| Shipping Height | 0.034m |
| Shipping Length | 0.235m |
3
From 3 ReviewBy: Doug Stewart onHi fellas I found the sinker mould great . Just heat the mould really hot spray inside the mould with WD 40 heat the lead really hot put wire in the middle of mould gently clamp mould and poor lead slowly and all finished Great Thank you Doug
By: Doug Stewart onHi fellas I found it great ,use a bit of wire in the middle heat the lead very hot ,and really heat the mould spray inside the mould with WD40 and alls good Thank you Doug
By: Paul onMoney saver in the long run. Fun little project when you have spare time. Perfect all the time every time.
Notify me when back in stock
*
Name is required
*
Please enter a valid email address
Please tick this box to proceed.








